also looking at this
fix: resolve source links through native drone docs
#40
56 files
+179
-159
| @@ -13,7 +13,7 @@ Keep propellers removed during bench integration. This release receives physical | ||
| 13 | 13 | to `.env` and run `./buddy key:generate`. Run `bun run simulate` before connecting a flight controller. |
| 14 | 14 | 4. Validate the camera independently with Raspberry Pi's [AI Camera guide](https://www.raspberrypi.com/documentation/accessories/ai-camera.html) |
| 15 | 15 | or [camera software guide](https://www.raspberrypi.com/documentation/computers/camera_software.html). |
| 16 | `rpicam-hello --list-cameras` lists detected cameras. The [camera pipeline](https://github.com/stacksjs/drone/blob/main/docs/camera-tracking.md) now consumes IMX500 frames/detections; its on-device validation remains pending. | |
| 16 | `rpicam-hello --list-cameras` lists detected cameras. The [camera pipeline](camera-tracking.md) now consumes IMX500 frames/detections; its on-device validation remains pending. | |
| 17 | 17 | 5. Install the supported ArduCopter firmware for Pixhawk 6C using an appropriate ground station. |
| 18 | 18 | Connect the autopilot to the Pi over USB using the exact connector on your board, then identify its |
| 19 | 19 | stable `/dev/serial/by-id/...` device. Grant the service account the OS's serial-device permissions. |